RM43160-X10 4U 60 Bays Dual Processor Server

SKU

RM43160-X10

Processor

CPU:

Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP)

Dual Socket R3 (LGA 2011)

Cores / Cache:

Up to 22 Cores / Up to 55MB Cache

System Bus:

QPI up to 9.6 GT/s

Note:

BIOS version 2.0 or above is required

Motherboard supports this maximum TDP. Please verify your system can thermally support.

Memory

Memory Capacity:

8x 288-pin DDR4 DIMM slots

Up to 1TB ECC 3DS LRDIMM, 512GB ECC RDIMM

Memory Type:

2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes:

RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB

LRDIMM: 64GB, 32GB

3DS LRDIMM: 128GB

Memory Voltage:

1.2 V

Error Detection:

Corrects single-bit errors

Chassis

4U Rackmount

Dimensions

916mm(D)x 447mm(W)x 176mm(H)

36”(D)x 17.6”(W)x 6.9”(H)

HDD Drive Bays

60x 3.5" Hot-swap Bays

2x External 2.5" (Optional)

HDD Backplane:

2 x 30-port 12Gb/s backplanes ( w/2 x 12Gb/s top-Loaded SAS expander cards)

Expansion Slots

PCI-Express:

3x PCI-E 3.0 x8

1x PCI-E 3.0 x16

1x PCI-E 3.0 x4 (in x8)

1x PCI-E 2.0 x4 (in x8)

Power Supply

1450W 1+1 Redundant 80Plus Gold Power supply

Input Output

(on board)

SATA:

10x SATA3 (6Gbps) ports

LAN:

2x RJ45 Gigabit Ethernet LAN ports

1x RJ45 Dedicated IPMI LAN port

USB:

4x USB 3.0 ports (2 rear + 2 via header)

5x USB 2.0 ports (2 rear + 2 via header + 1 Type A)

Video:

1x VGA port

Serial Port / Header:

2x Fast UART 16550 port / 1 Header

DOM:

DOM (Disk on Module) power connector

TPM:

1x TPM Header

Cooling:

Front:

4 x 80mm(T=38mm), PWM

Middle:

4 x 80mm(T=38mm), PWM

Onboard Devices:

Chipset:

Intel® C612 chipset

AHCI SATA:

SATA3 (6Gbps); RAID 0, 1, 5, 10

SCU SATA:

SATA3 (6Gbps); RAID 0, 1, 5, 10

IPMI:

Support for Intelligent Platform Management Interface v.2.0

IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

ASPEED AST2400 BMC

Network Controllers:

Intel® i210 Gigabit Ethernet controller

Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

1x Realtek RTL8211E PHY (dedicated IPMI)

Video:

ASPEED AST2400 BMC

Operating Environment:

Operating Temperature Range   

10°C - 35°C (50°F - 95°F)

Non-Operating Temperature Range   

-40°C - 70°C (-40°F - 158°F)

Operating Relative Humidity Range   

8% - 90% (non-condensing)

Non-Operating Relative Humidity Range

Details:

Front Buttons:

Power On/Off

System Reset

UID

2x USB2.0

Indicators:

1 x Power Status, 1 x Overheat/RPSU Failure, 60 x HDD Activity & Failure, 8 x Fan Failure, 2 x Internal SAS Controller Status LEDs

BIOS Type:

128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features:

Plug and Play (PnP)

PCI 2.3

ACPI 3.0 / 4.0

USB Keyboard support

SMBIOS 2.7.1

UEFI 2.3.1

Management

Software:

SuperDoctor® 5

Intel® Node Manager 3.0

Watch Dog

IPMI 2.0

Power Configurations:

ACPI Power Management

Power-on mode for AC power recovery