R281-3C0 Gigabyte 2U 12Bays Dual CPU Rackmount Server

SKU

R281-3C0

Processor

CPU:

2nd Generation Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors

Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor

CPU TDP up to 205W

NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable

Socket:

2 x LGA 3647

Socket P

Memory

24 x DIMM slots

DDR4 memory supported only

6-channel memory architecture

RDIMM modules up to 64GB supported

LRDIMM modules up to 128GB supported

Supports Intel® Optane™ DC Persistent Memory (DCPMM)

1.2V modules: 2933( 1DPC)/2666/2400/2133 MHz

Maximum verified DCPMM configuration:

* Ambient temperature 35°C

* 2nd Generation Intel® Xeon® Scalable processor 205W (Max.)

* DCPMM 256GB x12 pcs

DCPMM installation locations:

DIMM_P0_( A1, B1, C1)

DIMM_P0_( D1, E1, F1)

DIMM_P1_( G1, H1, I1)

DIMM_P1_( J1, K1, L1)

NOTE: 

1. 2933MHz for 2nd Generation Intel® Xeon® Scalable Processors only

2. Intel® Optane™ DC Persistent Memory for 2nd Generation Intel® Xeon® Scalable Processors only

3. The maximum number of DCPMM that can be installed is based on a maximum operating (ambient) temperature of 35°C

4. To enquire about installing a greater number of DCPMM, please consult with our technical or sales representative

Chassis

2U Rackmount Chassis

Dimensions

Chassis Dimensions:

438mm(W) x 87.5mm(H) x 730mm(D)

HDD Drive Bays

Front side:

12 x 3.5" SATA/SAS hot-swappable HDD/SSD bays

2.5" HDD/SSD supported

Rear side:

2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays

SAS card is required for SAS devices support

SAS:

Supported via add-on SAS Card

RAID:

Intel® SATA RAID 0/1/10/5

Expansion Slots

Riser Card CRS2131:

1x PCIe x16 slot (Gen3 x16 or x8), Full height half-length

1x PCIe x8 slots (Gen3 x0 or x8), Full height half-length

1x PCIe x8 slots (Gen3 x8), Full height half-length

Riser Card CRS2132:

1x PCIe x16 slot (Gen3 x16 or x8), Full height half-length

1x PCIe x8 slots (Gen3 x0 or x8), Full height half-length

1x PCIe x8 slots (Gen3 x8), Full height half-length

Riser Card CRS2124:

1x PCIe x8 slots (Gen3 x0 or x8), Low profile half-length

1x PCIe x16 slot (Gen3 x16 or x8), Low profile half-length

2x OCP mezzanine slots

PCIe Gen3 x16

Type1, P1, P2, P3, P4, K2, K3

Power Supply

2x 1200W redundant PSUs

80 PLUS Platinum

AC Input:

100-240V~/ 12-7A, 50-60Hz

DC Input:

240Vdc/ 6A

DC Output:

Max 1000W/ 100-240V~

+12V/ 80.5A

+12Vsb/ 3A

Max 1200W/ 200-240V~ or 240Vdc input

+12V/ 97A

+12Vsb/ 3A

Input Output

Internal I/O:

2x Power supply connectors

4x SlimSAS connectors

2x SATA 7-pin connectors

2x CPU fan headers

1x USB 3.0 header

1 TPM header

1x VROC connector

1x Front panel header

1x HDD back plane board header

1x PMBus connector

1x IPMB connector

1x Clear CMOS jumper

1x BIOS recovery jumper

Front I/O:

2x USB 3.0

1x Power button with LED

1x ID button with LED

1x Reset button

1x NMI button

1x System status LED

1x HDD activity LED

2x LAN activity LEDs

Rear I/O:

2x USB 3.0

1x VGA

1x COM (RJ45 type)

2x RJ45

1x MLAN

1x ID button with LED

Backplane I/O:

Front side_CBP20C3: 12x SATA/SAS ports

Rear side_CBP2020: 2x SATA/SAS ports

Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port

SAS card is required for SAS devices support

Cooling

4x 80x80x38mm (14'900rpm) fans

Onboard Devices:

LAN:

2x 1Gb/s LAN ports (Intel® I350-AM2)

1x 10/100/1000 management LAN

Video:

Integrated in Aspeed® AST2500

2D Video Graphic Adapter with PCIe bus interface

1920x1200@60Hz 32bpp, DDR4 SDRAM

Operating Environment

Operating temperature: 10°C to 35°C

Operating humidity: 8%-80% (non-condensing)

Non-operating temperature: -40°C to 60°C

Non-operating humidity: 20%-95% (non-condensing)

Detail

TPM:

1x TPM header with LPC interface

Optional TPM2.0 kit: CTM000

System Management:

Aspeed® AST2500 management controller

Avocent® MergePoint IPMI 2.0 web interface:

Network settings

Network security settings

Hardware information

Users control

Services settings

IPMI settings

Sessions control

LDAP settings

Power control

Fan profiles

Voltages, fans and temperatures monitoring

System event log

Events management (platform events, trap settings, email settings)

Serial Over LAN

vKVM & vMedia (HTML5)