Gigabyte G190-H44 1U 2Bays Dual Processor up to 4 GPU Server







Intel® Xeon® E5-2600 V3 processors supported

Intel® Xeon® E5-2600 V4 processors supported

To support 140W and 145W processors, the following conditions apply:

- Special fan duct required (see "Part Numbers" below)

- 1.8" HDD cage must be removed

- Front bottom PCIe slot cannot be used

Please refer to the manual of "SOP for installing fan duct with 145W processor" in support & download page

NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable


2 x LGA 2011-3

Mounting pitch: narrow ILM (56x94mm)

Max. length of M4 screw threads: 3.7mm

Screws longer than 3.7mm might damage the motherboard


16 x DIMM slots

DDR4 memory supported only

Quad channel memory architecture

RDIMM modules up to 32GB supported

LRDIMM modules up to 64GB supported

3DS LRDIMM modules up to 128GB supported

1.2V modules: 2133/2400 MHz


1U Rackmount Chassis


Chassis Dimensions:

440mm(W) x 43.5mm(H) x 900mm(D)

HDD Drive Bays

2 x 2.5" hot-swappable HDD/SSD bays

2 x 1.8" fixed HDD/SSD bays

Expansion Slots

2 x Full-length low-profile slots

- 1 x PCI-e x16 slot (Gen3 x8 bus)

- 1 x PCI-e x8 slot (Gen3 x8 bus)

4 x Full-length full-height x16 slots (Gen3 x16 bus), supporting:

- Support Intel® Xeon Phi cards

- Support NVIDIA® cards

- Support AMD® cards

Please contact us for details about the supported card models

4 x Riser cards:

- 1 x CRSG221

- 1 x CRSG220

- 1 x CRSG211

- 1 x CRSG210


- GIGABYTE carries out comprehensive validation to ensure support for Intel® Xeon Phi, Nvidia® and AMD® adapters.

- Note: each system is validated for population with a uniform GPU model. Support is not provided for mixed GPU populations.

- For the latest QVL, please contact your GIGABYTE representative.

Power Supply

2 x 2000W redundant PSU

80 PLUS Platinum


AC input:

- 1000W: 100-120V/ 12.5-10.5A, 50-60Hz

- 1800W: 200-220V/ 10-9.5A, 50-60Hz

- 1980W: 220-230V/ 10-9.8A, 50-60Hz

- 2000W: 230-240V/ 10-9.8A, 50-60Hz


DC output:

- 1000W@100-120V

+12V/ 83.3A

+12Vsb/ 3.5A

- 1800W@200-220V

+12V/ 150.0A

+12Vsb/ 3.5A

- 1980W@220-230V

+12V/ 165.0A

+12Vsb/ 3.5A

- 2000W@230-240V

+12V/ 166.7A

+12Vsb/ 3.5A

Input Output

Internal I/O:

2x 50-pin PSU connectors

4x 8-pin ATX 12V power connectors

1x 6-pin HDD back plane power connector

2x 4-pin HDD power connectors

1x Front panel header

1x USB 3.0 header

4x SATA III 6Gb/s ports

1x HDD back plane board header

1x SATA SGPIO header

1x TPM header

1x IPMB connector

2x RJ45 LAN port connectors

1x Serial header

1x Front LAN port LED (link / active) header

1x Front VGA header

1x Intel RAID key header

18x GPU fan headers

4x System fan headers

1x BIOS recovery jumper

1x Clear CMOS jumper

1x ME update jumper

1x S3 power on select jumper

1x Force to stop FRB timer jumper

1x BIOS write protect jumper

1x Clear password jumper

Front I/O:

2x USB 3.0

3x RJ45

1x VGA

1x Serial

1x ID button with LED

1x Power button with LED

1x Reset button

1x NMI button

Backplane I/O:

2x SAS / SATA ports


11 x 40x56mm (23'000rpm)

Onboard Devices:


2 x GbE LAN ports (Intel® I350-AM2)

1 x 10/100/1000 management LAN


Integrated in Aspeed® AST2400

2D Video Graphic Adapter with PCIe bus interface

1920x1200@60Hz 32bpp

Operating Environment

Operating temperature: 10°C to 35°C

Operating humidity: 8%-80% (non-condensing)

Non-operating temperature: -40°C to 60°C

Non-operating humidity: 20%-95% (non-condensing)


System Management:

Aspeed® AST2400 management controller

Avocent® MergePoint IPMI 2.0 web interface:

Network settings

Network security settings

Users control

Services settings

IPMI settings

Sessions control

LDAP settings

Power control

Voltages, fans and temperatures monitoring

System event log

Events management (platform events, trap settings, email settings)

Serial Over LAN

vKVM & vMedia (launch, configuration)


Standard Features
Configure CPU: IntelŽ XeonŽ Processor E5-2603 v4 (1.70 GHz, 85W)
Configure Memory: 8GB DDR4 2400 ECC Registered Memory
Configure Warranty: 1 Year Parts Replacement Warranty